Countax lawn tractors are built in Britain and are specifically designed for British lawns.
Typically, the three main components of a Countax lawn tractor are a power unit, a cutter deck and an optional powered grass collector.
This model features the C50 power unit and a 38 (97cm) XRD rear discharge cutter deck (a 36 (92cm) deck is also available) which makes it suitable for lawns of up to 1.5 acres.
The Power Unit
The Countax C50 is constructed around a robust chassis and is powered by a reliable single cylinder Briggs & Stratton engine. The engine provides plenty of power to cope with large lawns.
Steering is light and the operator controls are all within easy reach from the driving position. The comfortable seat is adjustable and an easy-to-read electronic dashboard keeps you informed of the critical functions of the mower.
Maximum manoeuvrability is provided by a hydrostatic drive which is controlled by twin pedals. Changing speed and direction is very easy giving you maximum control of the tractor.
A towing hitch and headlights come as standard.
The Cutter Deck
The 38 (97cm) XRD deck is a three-bladed rear discharge deck which allows you to leave the cut grass on the lawn or use the optional powered grass collector to collect the clippings. If access is a problem, a 36 (92cm) cutter deck is also available to make the tractor just a little bit narrower.
With a lowest height of cut of just 12mm, a fine lawn finish is achievable.
The blades are engaged electronically at the push of a button and the height of cut is controlled by a lever which utilises a gearing system to ensure that very little effort is required to change the height of cut.
The Powered Grass Collector (Optional)
The optional Powered Grass Collector (PGC) is mounted to the back of the tractor and uses a powered sweeper to sweep the grass clippings into the hopper.
Power is provided by a belt drive from the tractor and because the collector does not rely on a flow of air to collect the grass, collection performance is excellent even in wet conditions when air-blown collection systems might block. The grass collector is switched on and off at the push of a button.
In autumn, the collector can be used to gather fallen leaves from your lawn.
The collector is supported by a rear roller and the roller will provide a striped finish to your lawn.
When the mowing is done, a range of attachments can be fitted to your Countax C50 such as a powered scarifier, a powered spreader, a snow blade and any number of towable attachments.
| ||Operating Management System |
The electronic dashboard provides an at-a-glance view of the status of your lawn tractor.
| ||Hydrostatic Drive |
A Westwood is easy to drive. The harder you press the forward pedal the faster you drive forwards. The harder you press the reverse pedal the faster you drive backwards.
| ||Cast Front Axle |
Countax C Series lawn tractors feature a strong cast front axle. This is just one of the features to help ensure reliable performance over a long working life.
| ||XRD Cutter Deck |
The XRD cutter deck is made from high-grade steel and is reinforced to help protect against wear and tear.
|Cutting Width: ||38"/97cm|
|Key Start: ||Yes|
|Drive : ||Hydrostatic|
|Cutting Heights: ||12-101mm|
|Grass Collector: ||Optional 300 litre Powered Grass Collector|
|Engine: ||Briggs & Stratton 500cc Single Cylinder|
|Dimensions L x W x H: ||187cm x 103cm x 114cm excluding PGC|
|Machine Warranty: ||3 years / 225 hours in domestic use|
|Engine Warranty: ||2 years in domestic use|